FREE UK DELIVERY! ORDERS OVER £49.99 UK Only 

PLEASE NOTE:

Due to a family illness, we have reluctantly taken the decision to close the business and will no longer take any more orders.

Thank you for your custom and support over the years.

Best regards,

Terry Brine
29.06.26

High Density Eurocard: RRB-107

£12.62

High Density Eurocard, RRB-107 – Single height, Double Sided Eurocard 3 plane, 3U – 100mmx160mm. Prototyping Circuit boards designed for high density applications and for use with the Roadrunner Wiring System or Wire Wrap.

  • A 3 plane prototyping board with a copper pattern screen or ground plane marked ‘GND’ on the component side. The wiring side pattern has two power rails marked ‘VCC’ and ‘GND’ and the screen may be connected to the ‘GND’ rail by pinning
  • Hole matrix 2.54 x 2.54mm
  • Hole size 1.02mm
  • DIN 41612 connector mounting holes at one end – 32/64/96 way
  • Can be used with Roadrunner®, wire wrapping or discrete component wiring
  • Grid references
  • DIN 41494 cardframe compatible

Specifications:

Material epoxy glass or FR4; Board thickness 1.6mm; Connector pattern to DIN41612; Hole matrix 2.54 x 2.54mm; Hole size 1.02mm; Copper Thickness 1oz/ft2 or 35 microns or 305g/m2; Protective Coating OSP – organic solderability preservatives (anti tarnish); RoHS Compliant

Frequently Asked Questions

What is the RRB-107 High Density Eurocard?
▶
The RRB-107 is a single-height, double-sided Eurocard (3U) measuring 100 × 160 mm, featuring three copper planes (signal, power, and ground) for high-density prototyping applications.

What is the hole matrix and plane configuration?
▶
The board uses a 2.54 × 2.54 mm hole matrix with 1.02 mm drillings. The component side has a ground plane marked ‘GND’, and the wiring side features ‘VCC’ and ‘GND’ power rails with an internal signal plane.

What connector options are available?
▶
It includes DIN 41612 connector mounting holes at one end for 32-, 64-, or 96-way connectors, and is compatible with DIN 41494 card frames for rack integration.

What materials and protective finishes are used?
▶
Constructed from FR4 epoxy glass (1.6 mm thick) with a 35 µm copper thickness and an OSP (organic solderability preservative) finish for anti-tarnish protection; it is RoHS compliant.

What wiring methods are supported?
▶
Supports the Roadrunner® Wiring System, traditional wire wrap, and general-purpose discrete component wiring, with grid references to simplify component placement.

Related products

High Density Eurocard: RRB-107

Category

QUICKLINKS

SEND US A MESSAGE

CATEGORIES

© 2021 ROADRUNNER® ELECTRONICS. All rights reserved. Designed by Unitel Direct.